Top 10 Waveshare Eink 2.13 Display UK – Barebone PCs

As an Amazon Associate I earn from qualifying purchases.

1. Waveshare

#ad

Waveshare Zero WH Package E,Compatible with Raspberry Pi,with 2.13inch e-Paper HAT

#ad
Waveshare #ad - Built-in wifi, ideal choice for smart home applications and other IoT projects. Multiple matching packages available, please read carefully before placing an order. Package contain RPI WH and 2. 13inch e-Paper HAT. Comes with a 16gb tf card, time or graphic information, power supply and 2. 13inch e-paper HAT B. The e-paper display can be used to display the weather, etc. Onboard voltage translator, compatible with 3. 3v/5v mcus. 2. 13-inch e-paper display, red, 250 × 122 resolution, black, and white color display, 2 grey scale with 15s full refresh time.
BrandWaveshare #ad
ManufacturerWaveshare #ad
Weight0.22
Part NumberRaspberry Pi Zero WH Package E
ModelRaspberry Pi Zero WH Package E

2. Waveshare

#ad

2.13inch E-Ink Display HAT Rev2.1 Black,White Two-Color 250x122 Pixel E-Paper Screen LCD for Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH and Jetson Nano SPI Interface Support Partial Refresh

#ad
Waveshare #ad - Ultra low power consumption, basically power is only required for refreshing. This is 2. 13inch rev2. 1 version e-ink display hat for raspberry pi, with embedded controller, industrial instrument, supports partial refresh.

Operating voltage: 3. 3v/5v. Interface: spi. Display color: black, white. Partial refresh time: 03s. Full refresh time: 2s. Viewing angle: >170°. Due to the advantages like ultra low power consumption, it is an ideal choice for applications such as shelf label, 250x122 resolution, communicating via SPI interface, clear display without electricity, wide viewing angle, and so on. No backlight, keeps displaying last content for a long time even when power down.

Standard raspberry pi 40pin gpio extension header, supports Raspberry Pi series boards, Jetson Nano. Onboard voltage translator, compatible with 3. 3v/5v mcus. Preserved solder pads for SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc. Comes with development resources and manual examples for Raspberry Pi/Jetson Nano/Arduino/STM32.
BrandWaveshare #ad
ManufacturerWaveshare #ad
Height0.79
Length1.18
Width0.79
Part Number2.13inch e-Paper Display HAT
Model2.13inch e-Paper Display HAT

3. Waveshare

#ad

Waveshare 4.3inch LCD Capacitive Touch Display for Raspberry Pi 4B/3B+/3A+/3B/2B/B+/A+ 800×480 IPS Wide Angle MIPI DSI Interface Screen

#ad
Waveshare #ad - Supports pi 4b/3b+/3a+/3b/2b/b+/a+, cm3/3+ cm3/3+ requires extra adapter board. Supports Retropie, driver free. Supports raspbian, 5-points touch, driver free. Supports ubuntu / kali / wIN10 IoT, single point touch, driver free. Up to 5-points touch, depending on the operating system.
BrandWaveshare #ad
ManufacturerWaveshare #ad
Weight0.01 kg (0.02 Pounds)
Part Number4.3inch DSI LCD
Model4.3inch DSI LCD

4. Waveshare

#ad

Waveshare 2inch LCD Display Module IPS Screen 240×320 Resolution Onboard driver ST7789 SPI Interface RGB, 262K Color with Examples for Raspberry Pi/Jetson Nano/Arduino/STM32

#ad
Waveshare #ad - Comes with development resources and manual examples for Raspberry Pi/Jetson Nano/Arduino/STM32. Spi interface, requires minimum GPIO for controlling. Development resources download: www. Waveshare. Com/wiki/2inch_LCD_Module. This is a general lcd display module, ips screen, 240×320 resolution, 2inch diagonal, with embedded controller, communicating via SPI interface.
BrandWaveshare #ad
ManufacturerWaveshare #ad
Weight0.11
Part Number2inch IPS LCD Display Module

5. Waveshare

#ad

Waveshare 2.13inch Touch E-Paper E-Ink Display for Raspberry Pi Zero 250×122 Pixels Supports Partial Refresh with ABS Protection Case

#ad
Waveshare #ad - 2. 13" capacitive touch e-paper display, 5-point touch, 250×122 pixels. Ultra low power consumption, basically power is only required for refreshing. Standard raspberry pi 40pin gpio extension header, supports Raspberry Pi Zero / Zero W. Comes with development resources and manual examples for Raspberry Pi. Supports waken up by user-defined gesture. No backlight, keeps displaying last content for a long time even when power down.
BrandWaveshare #ad
ManufacturerWaveshare #ad
Part Number2.13inch Touch e-Paper HAT (with case)
Model2.13inch Touch e-Paper HAT (with case)

6. Waveshare

#ad

Waveshare 2.7 Inch E-Paper Display HAT Module Kit 264x176 Resolution 3.3v/5v E-ink Electronic Paper Screen with Embedded Controller for Raspberry Pi/Jetson Nano/Arduino/STM32 with SPI Interface

#ad
Waveshare #ad - This is an e-ink display hat for raspberry pi, 2. 7inch, 264x176 resolution, with embedded controller, communicating via SPI interface. Compatible with raspberry pi 2b/3b/3b+/zero/Zero W.

Comes with development resources and manual examples for Raspberry Pi/Arduino/STM32. Due to the advantages like ultra low power consumption, industrial instrument, wide viewing angle, great effect under sunlight, it is an ideal choice for applications such as shelf label, and so on. Ultra low power consumption, basically power is only required for refreshing. Onboard voltage translator, compatible with 3. 3v/5v mcus. No backlight, keeps displaying last content for a long time even when power down. Onboard 4x Keys.
BrandWaveshare #ad
ManufacturerWaveshare #ad
Height3.54
Length7.09
Weight0.02
Width3.94
Part Number2.7inch e-Paper HAT
Model2.7inch e-Paper HAT

7. Waveshare

#ad

Support 800×480 Resolution with DSI Interface Low Power Consumption, Waveshare Raspberry Pi 5inch Capacitive 5-Points Touch Display

#ad
Waveshare #ad - Supports retropie, driver free. Supports ubuntu / kali / wIN10 IoT, single point touch, driver free. Adjustable Brightness Via Software. Supports pi 4b/3b+/3a+/3b/2b/b+/a+, cm3/3+*, * cm3/3+ requires extra adapter board. Supports raspbian, 5-points touch, driver free.
BrandWaveshare #ad
ManufacturerWaveshare #ad
Height2.99
Length0.39
Weight0.02
Width4.72
Part Number5inch DSI LCD
Model5inch DSI LCD

8. IBest

#ad

IBest 4.2inch E-paper Display Module 400x300 Resolution 3.3V-5V Two-Color E-Ink Display HAT epaper Screen for Raspberry Pi/Arduino/Nucleo Support Full Refresh,SPI Interface

#ad
IBest #ad - Spi interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc. No backlight, keeps displaying last content for a long time even when power down. Onboard voltage translator, compatible with 3. 3v/5v mcus. Ultra low power consumption, basically power is only required for refreshing. Comes with development resources and manual examples for Raspberry Pi/Arduino/STM32.
BrandIBest #ad
ManufacturerIBest #ad
Weight0.11
Part Number4.2inch E-paper Display Module
Model4.2inch E-paper Display Module

9. Waveshare

#ad

Waveshare 2.9 Inch E-Paper Display Panel Module Kit 296x128 Resolution E-Ink Electronic Screen for for Raspberry Pi/Jetson Nano/Arduino/STM32 Support Partial Refresh SPI Interface

#ad
Waveshare #ad - No backlight, keeps displaying last content for a long time even when power down. Due to the advantages like ultra low power consumption, great effect under sunlight, wide viewing angle, industrial instrument, it is an ideal choice for applications such as shelf label, and so on.

This is an e-ink display module, communicating via spi interface, 2. 9inch, 296x128 resolution, with embedded controller, supports partial refresh. Comes with development resources and manual examples for Raspberry Pi/Jetson Nano/Arduino/STM32. Ultra low power consumption, basically power is only required for refreshing.
BrandWaveshare #ad
ManufacturerWaveshare #ad
Height3.54
Length7.09
Weight0.02
Width3.94
Part Number2.9inch e-Paper Module
Model2.9inch e-Paper Module

10. Waveshare

#ad

2.13inch E-Ink Display HAT, SPI Interface, 250x122 Resolution 3.3V/5V Black White Two-Color e-Paper Screen Module for Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+, Supports Partial Refresh

#ad
Waveshare #ad - No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing. Compatible with raspberry pi Zero/Zero W/Zero WH/2B/3B/3B+. Preserved solder pads for SPI interface, compatible with other controller boards like Arduino/Nucleo, etc. Onboard voltage translator, compatible with 3. 3v/5v mcus, comes with development resources and manual examples compatible with Raspberry Pi/Arduino/STM32.
BrandWaveshare #ad
ManufacturerWaveshare #ad
Part Number2.13inch E-Ink Display HAT
Model2.13inch E-Ink Display HAT